三种回生抗性淀粉对米淀粉的冻融与流变性质的影响

研究了添加锥栗、马铃薯与绿豆回生抗性淀粉(RS3)对米淀粉的冻融稳定性与流变学性质的影响。结果表明:添加锥栗、马铃薯与绿豆RS3都能显著提高米淀粉凝胶的持水率,且冻融超过3次后,其影响的差别越来越显著。随着冻融次数增多,米淀粉凝胶中不易流动水明显降低、自由水显著增加;当冻融次数相同时,添加RS3可使米淀粉凝胶中不易流动水明显增多而自由水显著减少。添加锥栗、马铃薯和绿豆RS3后,米淀粉糊的黏性模量明显增加,而弹性模量的增加更加显著。在相同剪切速率下,添加锥栗、马铃薯和绿豆RS3可以使米淀粉糊的抗剪切强度大大增强。添加相同质量浓度的锥栗、马铃薯和绿豆RS3后,米淀粉糊的稠度系数都大大升高、流体指数和滞后环面积显著减小。     

Enhanced microwave absorption and electromagnetic shielding property of (1-x)K0.5Na0.5NbO3 ~ xAl2O3 nano-ceramics

(1-x) K_0.5Na_0.5NbO₃ ~ xAl₂O₃ (x = 0, 0.2, 0.4, 0.6) ceramics were prepared via a traditional solid-state reaction method. The phase structure, micro-morphology, dielectric properties and electromagnetic properties of ceramic samples were studied and analyzed. Results indicate that all the samples are similar to K_0.5Na_0.5NbO₃ (KNN) in perovskite structure. With the increase of Al₂O₃ content, the X-ray diffraction peaks move to a large angle region, suggesting the substitution of niobium ions by aluminium ions and the distortion of the KNN lattice with a new phase arising. With the increase of Al₂O₃ content the grain size reduces and the dielectric constant decrease, yielding to the decrease of the electromagnetic shielding performance of ceramic. When the x is 0.4, the minimum value of reflectivity of sample is −28 dB at the frequency of 11.6 GHz. It can be concluded that both the grain size and Al₂O₃ content can obviously affect the electromagnetic properties of ceramics, which can be easily turned through a multi-layer SiO₂ heterojunction structure.     

Output feedback tracking control for rigid body attitude via immersion and invariance angular velocity observers

A novel immersion and invariance (I&I) angular velocity observer is presented for the attitude tracking control of a rigid body with the lack of angular rate. Global exponential convergence of angular velocity estimate errors are guaranteed by an innovative filter design for the estimates' Euclidean norm. The proposed method requires fewer filter states compared with existing I&I angular velocity observer designs, which achieves a simpler closed-loop structure (dynamic reduction). The observer synthesis and convergence are independent of the control torque, which leads to much convenience in establishing “separation property” when combining a proportional-derivative attitude tracking controller driven by angular velocity estimates. A rigorous stability analysis is provided to ensure the (almost) global asymptotic convergence of the overall closed-loop tracking errors, and several numerical simulations are carried out to demonstrate the effectiveness of the combined implementation of proposed angular velocity observer and full-state feedback attitude tracking controller.     

抗冲ACR树脂的合成及其性能评价

采用种子乳液聚合法,以丙烯酸丁酯为核层单体、甲基丙烯酸甲酯为壳层单体、甲基丙烯酸烯丙酯为交联剂制备了抗冲ACR树脂。考察了不同加料方式对ACR乳液粒径及对PVC冲击性能的影响,结果表明:连续滴加方式可实现乳液粒径的稳定控制,并能得到性能优异的抗冲ACR树脂。     

控锻控冷工艺对GCr15轴承钢力学性能的影响

探究不同控锻控冷热处理工艺对GCr15钢力学性能的影响,测试了它的回火稳定性、冲击性能、滚动接触疲劳寿命。结果表明,采用控锻控冷工艺可提高试样的抗回火稳定性,冲击性能提高50%以上,接触疲劳寿命提高40%以上。     

多因素影响下苯乙烯-丁二烯-苯乙烯嵌段共聚物改性沥青性能分析

通过掺加不同含量糠醛抽出油、红油增塑剂与苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)改性剂,分析其对SBS改性沥青各性能指标的影响,判断影响SBS改性沥青性能的主要因素。结果表明:改性沥青中SBS改性剂含量是提高软化点、弹性恢复的主要因素;糠醛抽出油含量增大则可明显提高其延度指标,且改善SBS改性沥青的离析程度;红油增塑剂含量增大可大幅提高SBS改性沥青的延度指标,但高温性能下降且离析严重,短期老化后指标下降幅度高于同等含量抽出油老化后指标。因此可在SBS含量确定的情况下,通过掺加适当的糠醛抽出油以改善SBS改性沥青的性能。     

Multi-Scale Analysis of Fretting Fatigue in Heterogeneous Materials Using Computational Homogenization

This paper deals with modeling of the phenomenon of fretting fatigue in heterogeneous materials using the multi-scale computational homogenization technique and finite element analysis (FEA). The heterogeneous material for the specimens consists of a single hole model (25% void/cell, 16% void/cell and 10% void/cell) and a four-hole model (25% void/cell). Using a representative volume element (RVE), we try to produce the equivalent homogenized properties and work on a homogeneous specimen for the study of fretting fatigue. Next, the fretting fatigue contact problem is performed for 3 new cases of models that consist of a homogeneous and a heterogeneous part (single hole cell) in the contact area. The aim is to analyze the normal and shear stresses of these models and compare them with the results of the corresponding heterogeneous models based on the Direct Numerical Simulation (DNS) method. Finally, by comparing the computational time and % deviations, we draw conclusions about the reliability and effectiveness of the proposed method.     

氮含量对HPD-1双相不锈钢组织及力学性能的影响

通过显微组织观察与力学性能测试研究了氮含量(0.08%~0.22％,质量分数)对HPD-1双相不锈钢硬度、拉伸性能、低温冲击性能及疲劳性能的影响。结果表明,氮含量变化可显著影响试验钢γ/α相比例,当氮含量由0.08％升高到0.22％,γ相含量由38.1％提高至56.5％。α相的硬度由273 HV10提高到343 HV10,γ相的硬度由238 HV10提高到299 HV10,试验钢强度明显提升。氮元素对两相比例和奥氏体相韧性的双重影响导致试验钢低温冲击性能呈先上升后下降的趋势;更高的氮含量抑制疲劳裂纹萌生与拓展,是影响HPD-1双相不锈钢室温疲劳性能的主要因素。撕裂棱是疲劳断口的显著特征。     

某轻型载货车储气罐支架振动断裂分析与优化

为了有效解决某轻型载货车储气罐支架的断裂故障,首先基于建立的储气罐支架有限元模型进行振动特性分析,分析结果表明其前三阶固有频率接均处于发动机激励频率范围之外,不会产生共振。其次测试各种道路的时域载荷,测试结果表明其中角度搓板路的激励频率与储气罐支架第一阶固有频率相接近,从而引起共振,不满足振动特性要求。然后对其进行振动强度分析,分析结果表明其应力水平不达标,其最大应力点与开裂处一致。再对其进行振动疲劳寿命预测分析,分析结果表明其疲劳寿命也不达标,其危险点也与失效位置相同。再采用集成平台对储气罐支架的结构进行优化设计,优化之后其模态频率、振动强度和振动疲劳均符合性能要求,并且其重量也有所减轻,总体优化效果较佳。最后整车试验结果表明优化之后储气罐支架的振动大幅度降低,并且没有发生失效。     

柱塞卡滞原因分析

某柱塞泵工作中发生柱塞卡滞,经显微形貌观察、光谱分析、电子探针面扫描分析和显微硬度分析等,确定柱塞卡滞的根本原因为原材料组织中存在严重的网状共晶碳化物,降低了强度和韧性,增大了柱塞球面表层的脆性,进而导致了球面部位的接触疲劳抗力下降。严重的疲劳磨损与接触疲劳造成了柱塞球面脱层破坏,由此产生的金属碎屑进入柱塞与衬套的配合间隙处,进而限制了柱塞的自由运动。